|
FOR IMMEDIATE RELEASE
Contact:
Harvey M. Chichester
Durall Industrial Flooring
7723 Pillsbury Avenue South
Minneapolis, MN 55423
Phone: 1-800-466-8910 or 952-888-1488 (24/7)
www.concrete-floor-coatings.com
harvey@concrete-floor-coatings.com
Rescuing Concrete Floors from Holes and Adhesives
Minneapolis, MN - December 9, 2005 - As companies attempt to
retrofit floor spaces and walls, carpeting and vinyl tile are often removed
or repositioned. These renovations usually end up exposing large areas
of adhesives, underlayments, and sprawling holes from anchors,
studding, and equipment.
Remodelers often can see no alternative but to reinstall similar
adhesives and floor coverings like carpet and tile. This is
unfortunate because hard epoxy, urethane, and glass emulsion surfaces
offer less expensive and longer wearing alternatives.
If concrete is exposed to wear, it will eventually deteriorate.
Friction wear, erosion, and contamination all play a role. Dust,
cracks, crumbling, rough surfaces, and the inability to keep the
environment clean are symptoms of a floor that has not been
protected and is moving towards an unserviceable condition. Carpeting
often holds contaminants in place and can be a growth medium for mold
and mildew. Vinyl tile cannot hold up under heavy wheeled traffic,
is subject to lifting when wet, and has a soft finishwhich can be
contaminated by solvents and dyes.
In contrast, laminated epoxy coatings create a wear-barrier between
a floor and its environment. These laminated surfaces not only keep
the concrete from deteriorating but also provide a protective plate
over it. Contaminants and hazards, like PCBs, heavy metals, and toxic
chemicals, are kept away from the porous concrete. Properly applied,
these laminated surfaces can provide decades of protection and service.
Epoxy coated floors can cure, rather than just cover over, the holes
that exist in even the most devastated floors. Customers are often
surprised how holes from old walls and equipment stands can be made
to disappear when filled with 100% solid epoxy and then ground flush.
The process is quick, easy, and long lasting.
Durall Industial Flooring has become a leading supplier of epoxy
industrial coatings in large part because it is the only supplier
that also manufactures over 500 cleaning products. Instead of
advising its customers to "apply to a clean surface," Durall
supplies them with adhesive removers, oil removing detergents,
and durable long lasting epoxy fillers for holes, joints, cracks,
and crumbling surfaces.
Durall installations include mission-critical sites in industries
such as printing, food processing, air travel, and breweries.
Companies like Japs Olson Printing continue to rely on decade-old
Durall floors that are used 24 hours per day, supporting million-
dollar presses with no allowance for shut down to do floor resurfacing.
Durall also provides factory-direct support for its products. Kits
of materials are customized to owner specification and delivered
directly to the job site. Kits include full directions and 24/7 help
lines staffed by seasoned flooring experts, so professionals and
amateurs alike can successfully install a quality floor.
Web visitors can obtain free, job-specific quotes on materials or
nationwide turnkey installations by completing a simple questionnaire
at www.concrete-floor-coatings.com.
For photo examples and more detail, visit
www.concrete-floor-coatings.com
For more information, contact Harvey Chichester at:
harvey@concrete-floor-coatings.com
Phone: 1-800-466-8910 or 952-888-1488 (24/7)
|
